Datasheet

ADG904/ADG904-R Data Sheet
Rev. C | Page 4 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 2.
Parameter Rating
V
DD
to GND –0.5 V to +4 V
Inputs to GND –0.5 V to V
DD
+ 0.3 V
1
Continuous Current 30 mA
Input Power 18 dBm
Operating Temperature Range
Industrial (B Version) –40°C to +85°C
Storage Temperature Range
–65°C to +150°C
Junction Temperature 150°C
TSSOP Package
θ
JA
Thermal Impedance 143°C/W
LFCSP Package
θ
JA
Thermal Impedance
(4-Layer Board)
30.4°C/W
Lead Temperature, Soldering (10 sec) 300°C
IR Reflow, Peak Temperature (<20 sec) 235°C
ESD 1 kV
1
RFx off port inputs to ground = –0.5 V to V
DD
– 0.5 V.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability. Only one absolute maximum rating may be
applied at any one time.
Table 3. Truth Table
A1 A0
EN
ON Switch
1
X X 1 None
0 0 0 RF1
0 1 0 RF2
1 0 0 RF3
1 1 0 RF4
1
Off switches have: 50 Ω termination to GND (ADG904); shunt to GND
(ADG904-R).
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary
ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.