Datasheet

ADG884 Data Sheet
Rev. D | Page 6 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 4.
Parameter Rating
V
DD
to GND −0.3 V to +6 V
Analog Inputs,
1
Digital Inputs −0.3 V to V
DD
+ 0.3 V or 30 mA
(whichever occurs first)
Peak Current, S or D 600 mA (pulsed at 1 ms, 10%
duty cycle maximum)
Continuous Current, S or D 400 mA
Operating Temperature Range −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
10-Lead MSOP, Thermal Impedance
θ
JA
206°C/W
θ
JC
44°C/W
10-Ball WLCSP (4-Layer Board),
Thermal Impedance
θ
JA
120°C/W
10-Lead LFCSP_WD (4-Layer Board),
Thermal Impedance
θ
JA
76°C/W
θ
JC
13.5°C/W
Reflow Soldering (Pb-Free)
Peak Temperature 260(+ 0 or −5)°C
Time at Peak Temperature 10 sec to 40 sec
1
Overvoltages at IN, S, or D pins are clamped by internal diodes. Current
should be limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any
one time.
ESD CAUTION