Datasheet

ADG858
Rev. A | Page 5 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter Rating
V
DD
to GND −0.3 V to +6 V
Analog Inputs
1
−0.3 V to V
DD
+ 0.3 V
Digital Inputs
1
−0.3 V to V
DD
or 10 mA,
whichever occurs first
Peak Current, S or D
500 mA (pulsed at 1 ms,
10% duty cycle max)
Continuous Current, S or D 250 mA
Operating Temperature Range −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
16-Lead Mini LFCSP
θ
JA
Thermal Impedance, 3-Layer Board 84.9°C/W
Reflow Soldering, Pb-Free
Peak Temperature 260(+0/−5)°C
Time at Peak Temperature 10 sec to 40 sec
1
Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any one time.
ESD CAUTION