Datasheet

ADG836
Rev. A | Page 6 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 4.
Parameter Rating
V
DD
to GND −0.3 V to +4.6 V
Analog Inputs
1
−0.3 V to V
DD
+ 0.3 V
Digital Inputs
1
−0.3 V to 4.6 V or 10 mA,
whichever occurs first
Peak Current, S or D
3.3 V Operation 500 mA
2.5 V Operation 460 mA
1.8 V Operation
420 mA (pulsed at 1ms,
10% duty cycle max)
Continuous Current, S or D
3.3 V Operation 300 mA
2.5 V Operation 275 mA
1.8 V Operation 250 mA
Operating Temperature Range
Automotive (Y Version) −40°C to +125°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
MSOP Package
θ
JA
Thermal Impedance 206°C/W
θ
JC
Thermal Impedance 44°C/W
LFCSP Package
θ
JA
Thermal Impedance (3-Layer
Board)
61.1°C/W
IR Reflow, Peak Temperature <20 sec 235°C
1
Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating may be applied at any one
time.
Table 5. Truth Table
Logic Switch A Switch B
0 Off On
1 On Off
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.