Datasheet

ADG821/ADG822/ADG823
Rev. A | Page 5 of 12
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter Rating
V
DD
to GND −0.3 V to +7 V
Analog Inputs
1
−0.3 V to V
DD
+ 0.3 V or 30 mA,
whichever occurs first
Digital Inputs
1
−0.3 V to V
DD
+ 0.3 V or 30 mA,
whichever occurs first
Peak Current, S or D
400 mA (pulsed at 1 ms,
10% duty cycle maximum)
Continuous Current, S or D 200 mA
Operating Temperature Range
Automotive −40°C to +125°C
Storage Temperature Range −65°C to +150°C
Junction Temperature (T
J
max) 150°C
Package Power Dissipation (T
J
max − T
A
)/θ
JA
8-Lead MSOP Thermal Impedance
θ
JA
206°C/W
θ
JC
44°C/W
Lead Temperature,
Soldering (10 sec)
300°C
IR Reflow, Peak Temperature (<20
sec)
235°C
1
Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Table 4. Truth Table for the ADG821/ADG822
ADG821 INx ADG822 INx Switch x Condition
0 1 Off
1 0 On
Table 5. Truth Table for the ADG823
IN1 IN2 Switch S1 Switch S2
0 0 Off On
0 1 Off Off
1 0 On On
1 1 On Off
ESD CAUTION