Datasheet
REV.
ADG781/ADG782/ADG783
–4–
ABSOLUTE MAXIMUM RATINGS
1
(T
A
= 25°C unless otherwise noted.)
V
DD
to GND . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +6 V
Analog, Digital Inputs
2
. . . . . . . . . . –0.3 V to V
DD
+ 0.3 V or
30 mA, Whichever Occurs First
Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . . 30 mA
Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
(Pulsed at 1 ms, 10% Duty Cycle max)
Operating Temperature Range
Industrial (B Version) . . . . . . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Chip Scale Package
θ
JA
Thermal Impedance . . . . . . . . . . . . . . . . . . . . . 32°C/W
Lead Temperature, Soldering (10 sec) . . . . . . . . . . . . 300°C
IR Reflow (<20 sec) . . . . . . . . . . . . . . . . . . . . . . . . . 235°C
NOTES
1
Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability. Only one absolute
maximum rating may be applied at any one time.
2
Overvoltages at IN, S, or D will be clamped by internal diodes. Current should be
limited to the maximum ratings given.
PIN CONFIGURATIONTable I. Truth Table (ADG781/ADG782)
ADG781 In ADG782 In Switch Condition
01ON
1 0 OFF
Table II. Truth Table (ADG783)
Logic Switch 1, 4 Switch 2, 3
0 OFF ON
1 ON OFF
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADG781/ADG782/ADG783 feature proprietary ESD protection circuitry, permanent
damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper
ESD precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
(LFCSP)
C
14
13
12
1
3
4
S2
15 D2
V
DD
S3
11
D3
D1
GND
2
S1
S4
5
D4
7
IN4
6
NC
8
NC
9
IN3
10
NC
19
IN1
20
NC
18
NC
17
IN2
16
NC
ADG781/
ADG782/
ADG783
TOP VIEW
(Not to Scale)
NOTES
1. NC = NO CONNECT.
2. EXPOSED PAD TIED TO SUBSTRATE, GND.