Datasheet

ADG772 Data Sheet
Rev. B | Page 4 of 12
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 2.
Parameter Rating
V
DD
to GND −0.3 V to +4.6 V
Analog Inputs,
1
Digital Inputs −0.3 V to V
DD
+ 0.3 V or
10 mA, whichever occurs first
Peak Current, Pin S1A, Pin S2A,
Pin D1, or Pin D2
100 mA (pulsed at 1 ms, 10%
duty cycle max)
Continuous Current, Pin S1A,
Pin S2A, Pin D1, or Pin D2
30 mA
Operating Temperature
Industrial Range (B Version)
−40°C to +85°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
θ
JA
Thermal Impedance
(4-Layer Board)
10-Lead Mini LFCSP 131.6°C/W
12-Lead LFCSP 61°C/W
Pb-Free Temperature,
Soldering, IR Reflow
Peak Temperature 260(+0/−5)°C
Time at Peak Temperature 10 sec to 40 sec
1
Overvoltages at the IN1, IN2, S1A, S2A, D1, or D2 pin are clamped by internal
diodes. Current should be limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any
one time.
ESD CAUTION