Datasheet

Data Sheet ADG5236
Rev. B | Page 17 of 20
TRENCH ISOLATION
In the ADG5236, an insulating oxide layer (trench) is placed
between the NMOS and the PMOS transistors of each CMOS
switch. Parasitic junctions, which occur between the transistors
in junction isolated switches, are eliminated, and the result is a
completely latch-up proof switch.
In junction isolation, the N and P wells of the PMOS and
NMOS transistors form a diode that is reverse-biased under
normal operation. However, during overvoltage conditions, this
diode can become forward-biased. A silicon controlled rectifier
(SCR) type circuit is formed by the two transistors causing a
significant amplification of the current that, in turn, leads to
latch-up. With trench isolation, this diode is removed, and the
result is a latch-up proof switch.
NMOS PMOS
P WELL N WELL
BURIED OXIDE LAYER
HANDLE WAFER
TRENCH
09769-045
Figure 34. Trench Isolation