Datasheet

High Voltage, Latch-Up Proof,
8-/16-Channel Multiplexers
Data Sheet
ADG5206/ADG5207
Rev. A Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] ©2012–2013 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Latch-up proof
3.5 pF off source capacitance
Off drain capacitance
ADG5206: 64 pF
ADG5207: 33 pF
0.35 pC typical charge injection
±0.02 nA on channel leakage
Low on resistance: 155 Ω typical
±9 V to ±22 V dual-supply operation
9 V to 40 V single-supply operation
V
SS
to V
DD
analog signal range
Human body model (HBM) ESD rating
ADG5206: 8 kV all pins
ADG5207: 8 kV I/O port to supplies
APPLICATIONS
Automatic test equipment
Data acquisition
Instrumentation
Avionics
Battery monitoring
Communication systems
FUNCTIONAL BLOCK DIAGRAMS
Figure 1.
Figure 2.
GENERAL DESCRIPTION
The ADG5206 and ADG5207 are monolithic CMOS analog
multiplexers comprising 16 single channels and 8 differential
channels, respectively. The ADG5206 switches one of sixteen
inputs to a common output, as determined by the 4-bit binary
address lines, A0, A1, A2, and A3. The ADG5207 switches one
of eight differential inputs to a common differential output, as
determined by the 3-bit binary address lines, A0, A1, and A2.
An EN input on both devices enables or disables the device. When
EN is low, the device is disabled and all channels switch off. The
ultralow capacitance and charge injection of these switches make
them ideal solutions for data acquisition and sample-and-hold
applications, where low glitch and fast settling are required. Fast
switching speed coupled with high signal bandwidth make these
devices suitable for video signal switching.
Each switch conducts equally well in both directions when on,
and each switch has an input signal range that extends to the
power supplies. In the off condition, signal levels up to the
supplies are blocked.
The ADG5206/ADG5207 do not have V
L
pins; instead, an on-chip
voltage generator generates the logic power supply internally.
PRODUCT HIGHLIGHTS
1. Trench Isolation Guards Against Latch-Up. A dielectric trench
separates the P and N channel transistors to prevent latch-up
even under severe overvoltage conditions.
2. Optimal switch design for low charge injection, low switch
capacitance, and low leakage currents.
3. The ADG5206 achieves 8 kV HBM ESD specification on
all external pins, while the ADG5207 achieves 8 kV on the
I/O port to supply pins, 2 kV on the I/O port to I/O port
pins, and 8 kV on all other pins.
4. Dual-Supply Operation. For applications where the analog
signal is bipolar, the ADG5206/ADG5207 can be operated
from dual supplies of up to ±22 V.
5. Single-Supply Operation. For applications where the
analog signal is unipolar, the ADG5206/ADG5207 can be
operated from a single rail power supply of up to 40 V.
ADG5206
S1
S16
D
1-OF-16
DECODER
A0 A1
A2 A3 EN
10714-001
ADG5207
S1A
S8B
DA
DB
S8A
S1B
1-OF-8
DECODER
A0 A1
A2 EN
10714-002