Datasheet

ADG436
Rev. B | Page 7 of 12
TERMINOLOGY
Table 6.
Mnemonic Descriptions
R
ON
Ohmic resistance between D and S.
∆R
ON
R
ON
variation due to a change in the analog input voltage with a constant load current.
R
ON
Match Difference between the R
ON
of any two channels.
I
S
(OFF) Source leakage current with the switch off.
I
D
, I
S
(ON) Channel leakage current with the switch on.
V
D
(V
S
) Analog voltage on terminals D, S.
C
S
(OFF) OFF switch source capacitance.
C
D
, C
S
(ON) ON switch capacitance.
t
ON
Delay between applying the digital control input and the output switching on.
t
OFF
Delay between applying the digital control input and the output switching off.
t
OPEN
Break-before-make delay when switches are configured as a multiplexer.
V
INL
Maximum input voltage for Logic 0.
V
INH
Minimum input voltage for Logic 1.
I
INL
(I
INH
) Input current of the digital input.
Crosstalk A measure of unwanted signal that is coupled through from one channel to another as a result of parasitic capacitance.
Off Isolation A measure of unwanted signal coupling through an OFF switch.
Charge Injection A measure of the glitch impulse transferred from the digital input to the analog output during switching.
I
DD
Positive supply current.
I
SS
Negative supply current.