Datasheet

ADG333A
Rev. A | Page 5 of 12
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C unless otherwise noted.
Table 3.
Parameter Min
V
DD
to V
SS
+44 V
V
DD
to GND –0.3 V to +30 V
V
SS
to GND +0.3 V to –30 V
Analog, Digital Inputs
1
V
SS
– 2 V to V
DD
+ 2 V or 20 mA,
whichever occurs first
Continuous Current, S or D 20 mA
Peak Current, S or D (Pulsed at
1 ms, 10% Duty Cycle Max)
40 mA
Operating Temperature Range
Industrial (B Version) −40°C to +85°C
Storage Temperature Range −65°C to +125°C
Junction Temperature 150°C
θ
JA
, Thermal Impedance
PDIP Package 103°C/W
SOIC Package 74°C/W
SSOP Package 130°C/W
Lead Temperature, Soldering
(10 sec)
260°C
Lead Temperature, Soldering
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
Lead Temperature, Soldering
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
1
Overvoltage at IN, S, or D is clamped by internal diodes. Current should be
limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Table 4. Truth Table
Logic Switch A Switch B
0 Off On
1 On Off
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.