Datasheet

ADG2188
Rev. 0 | Page 24 of 28
EVALUATION BOARD
The ADG2188 evaluation board allows designers to evaluate the
high performance 8 × 8 switch array of the ADG2188 with a
minimum of effort.
The evaluation kit includes a populated, tested ADG2188
printed circuit board. The evaluation board interfaces to the
USB port of a PC, or it can be used as a standalone evaluation
board. Software is available with the evaluation board that
allows the user to easily program the ADG2188 through the USB
port. Schematics of the evaluation board are shown in
Figure 36
and
Figure 37. The software runs on any PC that has Microsoft®
Windows® 2000 or Windows XP installed.
USING THE ADG2188 EVALUATION BOARD
The ADG2188 evaluation kit is a test system designed to
simplify the evaluation of the ADG2188. Each input/output
of the part comes with a socket specifically chosen for easy
audio/video evaluation. An application note is also available
with the evaluation board that gives full information on
operating the evaluation board.
POWER SUPPLY
The ADG2188 evaluation board can be operated with both
single and dual supplies. V
DD
and V
SS
are supplied externally by
the user. The V
L
supply can be applied externally, or the USB
port can be used to power the digital circuitry.