Datasheet

ADG211A/ADG212A Data Sheet
Rev. C | Page 4 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise stated.
Table 2.
Parameter Rating
V
DD
to V
SS
44 V
V
DD
to GND 25 V
V
SS
to GND −25 V
V
L
to GND −0.3 V, 25 V
Analog Inputs
1
Voltage at S, D V
SS
− 0.3 V to V
DD
+ 0.3 V
Continuous Current, S or D 30 mA
Pulsed Current S or D
1 ms Duration, 10% Duty Cycle 70 mA
Digital Inputs
1
Voltage at IN
V
SS
− 2 V to V
DD
+ 2 V or
20 mA, Whichever
Occurs First
Power Dissipation (Any Package)
Up to +75°C 470 mW
Derates above +75°C by 6 mW/°C
Operating Temperature −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Lead Temperature (Soldering 10 sec) +300°C
1
Overvoltage at IN, S, or D will be clamped by diodes. Current should be
limited to the Maximum Rating listed in Table 2.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION