Datasheet

ADG2108 Data Sheet
Rev. B | Page 24 of 28
EVALUATION BOARD
The ADG2108 evaluation board allows designers to evaluate the
high performance ADG2108 8 × 10 switch array with a minimum
of effort.
The evaluation kit includes a populated, tested ADG2108
printed circuit board. The evaluation board interfaces to the
USB port of a PC, or it can be used as a standalone evaluation
board. Software is available with the evaluation board that
allows the user to easily program the ADG2108 through the USB
port. Schematics of the evaluation board are shown in Figure 36
and Figure 37. The software runs on any PC that has Microsoft®
Windows® 2000 or Windows XP installed.
USING THE ADG2108 EVALUATION BOARD
The ADG2108 evaluation kit is a test system designed to
simplify the evaluation of the ADG2108. Each input/output of
the part comes with a socket specifically chosen for easy
audio/video evaluation. An application note is also available
with the evaluation board that gives full information on
operating the evaluation board.
POWER SUPPLY
The ADG2108 evaluation board can be operated with both
single and dual supplies. V
DD
and V
SS
are supplied externally by
the user. The V
L
supply can be applied externally, or the USB
port can be used to power the digital circuitry.