Datasheet

ADG1633/ADG1634
Rev. 0 | Page 8 of 20
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Table 7.
Parameter Rating
V
DD
to V
SS
18 V
V
DD
to GND −0.3 V to +18 V
V
SS
to GND +0.3 V to −18 V
Analog Inputs
1
V
SS
− 0.3 V to V
DD
+ 0.3 V or
30 mA, whichever occurs first
Digital Inputs
1
GND − 0.3 V to V
DD
+ 0.3 V or
30 mA, whichever occurs first
Peak Current, S or D
450 mA (pulsed at 1 ms,
10% duty cycle maximum)
Continuous Current, S or D
2
Data + 15%
Operating Temperature Range
Industrial (Y Version) −40°C to +125°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
16-Lead TSSOP, θ
JA
Thermal
Impedance, 0 Airflow (4-
Layer Board)
112.6°C/W
20-Lead TSSOP, θ
JA
Thermal
Impedance, 0 Airflow
(4-Layer Board)
95°C/W
16-Lead LFCSP (3 mm × 3 mm),
θ
JA
Thermal Impedance, 0
Airflow (4-Layer Board)
48.7°C/W
16-Lead LFCSP (4 mm × 4 mm),
θ
JA
Thermal Impedance, 0
Airflow (4-Layer Board)
30.4°C/W
Reflow Soldering Peak
Temperature, Pb free
260°C
ESD CAUTION
1
Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
2
See Table 5 and Table 6.