Datasheet

ADG1311/ADG1312/ADG1313
Rev. A | Page 5 of 12
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter Rating
V
DD
to V
SS
35 V
V
DD
to GND −0.3 V to +25 V
V
SS
to GND +0.3 V to −25 V
Analog Inputs
1
V
SS
− 0.3 V to V
DD
+ 0.3 V or
30 mA, whichever occurs first
Digital Inputs
1
GND − 0.3 V to V
DD
+ 0.3 V or
30 mA, whichever occurs first
Peak Current, S or D
100 mA (pulsed at 1 ms,
10% duty cycle max)
Continuous Current per
Channel, S or D
25 mA
Operating Temperature Range
Automotive −40°C to +105°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
16-Lead TSSOP, θ
JA
Thermal
Impedance (4-layer board)
112°C/W
16-Lead SOIC, θ
JA
Thermal
Impedance
77°C/W
Reflow Soldering Peak
Temperature, Pb free
260°C
1
Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Table 4. ADG1311/ADG1312 Truth Table
ADG1311 INx ADG1312 INx Switch Condition
0 1 On
1 0 Off
Table 5. ADG1313 Truth Table
ADG1313 INx Switch 1, 4 Switch 2, 3
0 Off On
1 On Off
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.