Datasheet

ADG1233/ADG1234
Rev. B | Page 7 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter Rating
V
DD
to V
SS
35 V
V
DD
to GND −0.3 V to +25 V
V
SS
to GND +0.3 V to −25 V
Analog, Digital Inputs
1
V
SS
− 0.3 V to V
DD
+ 0.3 V or
30 mA, whichever occurs
first
Continuous Current, S or D 24 mA
Peak Current, S or D (Pulsed at
1 ms, 10% Duty Cycle Maximum)
100 mA
Operating Temperature Range
Automotive Temperature Range
(Y Version)
−40°C to +125°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
TSSOP, θ
JA
, Thermal Impedance 112°C/W
LFCSP, θ
JA
, Thermal Impedance 30.4°C/W
Reflow Soldering Peak Temperature,
Pb-Fee
260°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating is applied at any one time.
1
Overvoltages at A,
EN
, S, or D are clamped by internal diodes. Current should
be limited to the maximum ratings given.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.