Datasheet

ADCLK905/ADCLK907/ADCLK925
Rev. 0 | Page 5 of 16
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Rating
Supply Voltage
V
CC
− V
EE
6.0 V
Input Voltage
D (D1, D2), D (D1, D2)
V
EE
− 0.5 V to
V
CC
+ 0.5 V
D1, D2, D1, D2 to V
T
Pin
(CML or PECL Termination)
±40 mA
D (D1, D2) to D (D1, D2)
±1.8 V
Maximum Voltage on Output Pins V
CC
+ 0.5 V
Maximum Output Current 35 mA
Input Termination, V
T
to D (D1, D2), D (D1, D2)
±2 V
Voltage Reference, V
REF
V
CC
− V
EE
Temperature
Operating Temperature Range, Ambient −40°C to +125°C
Operating Temperature, Junction 150°C
Storage Temperature Range −65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 3. Thermal Resistance
Package Type θ
JA
Unit
16-lead LFCSP 70 °C/W
ESD CAUTION