Datasheet
Table Of Contents
- FEATURES
- APPLICATIONS
- GENERAL DESCRIPTION
- TABLE OF CONTENTS
- REVISION HISTORY
- FUNCTIONAL BLOCK DIAGRAM
- SPECIFICATIONS
- ABSOLUTE MAXIMUM RATINGS
- PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
- TYPICAL PERFORMANCE CHARACTERISTICS
- SYSTEM BLOCK DIAGRAM
- THEORY OF OPERATION
- INITIALIZATION
- AUDIO ADCs
- AUDIO DACs
- CONTROL PORTS
- SIGNAL PROCESSING
- RAMS AND REGISTERS
- CONTROL REGISTER MAP
- CONTROL REGISTER DETAILS
- 2048 TO 2055 (0x0800 TO 0x0807)—INTERFACE REGISTERS
- 2056 (0x0808)—GPIO PIN SETTING REGISTER
- 2057 TO 2060 (0x0809 TO 0x080C)—AUXILIARY ADC DATA REGISTERS
- 2064 TO 2068 (0x0810 TO 0x0814)—SAFELOAD DATA REGISTERS
- 2069 TO 2073 (0x0815 TO 0x819)—SAFELOAD ADDRESS REGISTERS
- 2074 TO 2075 (0x081A TO 0x081B)—DATA CAPTURE REGISTERS
- 2076 (0x081C)—DSP CORE CONTROL REGISTER
- 2078 (0x081E)—SERIAL OUTPUT CONTROL REGISTER
- 2079 (0x081F)—SERIAL INPUT CONTROL REGISTER
- 2080 TO 2081 (0x0820 TO 0x0821)—MULTIPURPOSE PIN CONFIGURATION REGISTERS
- 2082 (0x0822)—AUXILIARY ADC AND POWER CONTROL
- 2084 (0x0824)—AUXILIARY ADC ENABLE
- 2086 (0x0826)—OSCILLATOR POWER-DOWN
- 2087 (0x0827)—DAC SETUP
- MULTIPURPOSE PINS
- LAYOUT RECOMMENDATIONS
- TYPICAL APPLICATION SCHEMATICS
- OUTLINE DIMENSIONS
Data Sheet ADAU1701
Rev. C | Page 35 of 52
2056 (0x0808)—GPIO PIN SETTING REGISTER
This register allows the user to set the GPIO pins through the
control port. High or low settings can be directly written to or
read from this register after setting the GPIO pin setting register
control port write mode (GPCW) in the core control register.
This register is updated once every LRCLK frame (1/f
S
).
Table 34. GPIO Pin Setting Register Bit Map
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 Default
0 0 0 0 MP11 MP10 MP09 MP08 MP07 MP06 MP05 MP04 MP03 MP02 MP01 MP00 0x0000
Table 35.
Bit Name Description
MP[11:0] Setting of multipurpose pin when controlled through SPI or I
2
C