Datasheet

ADAS1000/ADAS1000-1/ADAS1000-2 Data Sheet
Rev. A | Page 58 of 80
Table 29. Pace Detection Control Register (PACECTL) Address 0x04, Reset Value = 0x000F88
1
R/W
Default Bit Name Function
[23:12] Reserved Reserved, set to 0
R/W 1 11 PACEFILT W Pace width filter
0 = filter disabled
1 (default)
= filter enabled
R/W 1 10 PACETFILT2 Pace Validation Filter 2
0 = filter disabled
1 (default)
= filter enabled
R/W 1 9 PACETFILT1 Pace Validation Filter 1
0 = filter disabled
1 (default) = filter enabled
R/W 11 [8:7] PACE3SEL [1:0] Set lead for pace detection measurement
00 = Lead I
01 = Lead II
10 = Lead III
11 = Lead aVF
R/W 00 [6:5] PACE2SEL [1:0]
R/W 01 [4:3] PACE1SEL [1:0]
R/W
0
2
PACE3EN
Enable pace detection algorithm
0 (default) = pace detection disabled
1 = pace detection enabled
R/W 0 1 PACE2EN
R/W 0 0 PACE1EN
1
ADAS1000 model only, ADAS1000-1/ADAS1000-2 models do not contain these features.