Datasheet

ADA4691-2/ADA4691-4/ADA4692-2/ADA4692-4
Rev. C | Page 6 of 20
ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter Rating
Supply Voltage 6 V
Input Voltage V
SS
− 0.3 V to V
DD
+ 0.3 V
Input Current
1
±10 mA
Shutdown Pin Rise/Fall Times 50 μs maximum
Differential Input Voltage
2
±V
SY
Output Short-Circuit Duration to GND Indefinite
Temperature
Storage Temperature Range −65°C to +150°C
Operating Temperature Range −40°C to +125°C
Junction Temperature Range −65°C to +150°C
Lead Temperature (Soldering, 60 sec) 300°C
1
Input pins have clamp diodes to the supply pins. Limit the input current to
10 mA or less whenever the input signal exceeds the power supply rail by 0.3 V.
2
Differential input voltage is limited to 5 V or the supply voltage, whichever
is less.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages and
measured using a standard 4-layer board, unless otherwise
specified.
Table 5. Thermal Resistance
Package Type θ
JA
θ
JC
Unit
8-Lead SOIC_N (R-8) 120 45 °C/W
8-Lead LFCSP (CP-8-6) 125 40 °C/W
9-Ball WLCSP (CB-9-3) 77 N/A
1
°C/W
10-Lead LFCSP (CP-10-11) 115 40 °C/W
16-Lead LFCSP (CP-16-22) 75 12 °C/W
14-Lead TSSOP (RU-14) 112 35 °C/W
1
N/A = not applicable.
ESD CAUTION