Datasheet

ADA4665-2
Rev. 0 | Page 5 of 20
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 5.
Parameter Rating
Supply Voltage 16.5 V
Input Voltage
1
GND − 0.3 V to V
SY
+ 0.3 V
Input Current ±10 mA
Differential Input Voltage ±V
SY
Output Short-Circuit Duration to GND Indefinite
Storage Temperature Range −65°C to +150°C
Operating Temperature Range −40°C to +125°C
Junction Temperature Range −65°C to +150°C
Lead Temperature (Soldering, 60 sec) 300°C
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages. This
value was measured using a 4-layer JEDEC standard printed
circuit board.
Table 6. Thermal Resistance
Package Type θ
JA
θ
JC
Unit
8-Lead SOIC_N (R-8) 158 43 °C/W
8-Lead MSOP (RM-8) 186 52 °C/W
ESD CAUTION
1
The input pins have clamp diodes to the power supply pins.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.