Datasheet

Data Sheet ADA4522-1/ADA4522-2/ADA4522-4
Rev. F | Page 7 of 33
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter Rating
Supply Voltage 60 V
Input Voltage (V−) − 300 mV to (V+) + 300 mV
Input Current
1
±10 mA
Differential Input Voltage ±5 V
Output Short-Circuit
Duration to Ground
Indefinite
Temperature Range
Storage −65°C to +150°C
Operating −40°C to +125°C
Junction −65°C to +150°C
Lead Temperature (Soldering,
60 sec)
300°C
1
The input pins have clamp diodes to the power supply pins. Limit the input
current to ±10 mA or less whenever input signals exceed the power supply
rail by 300 mV.
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst case conditions, that is, a device
soldered in a circuit board for surface-mount packages using a
standard 4-layer JEDEC board.
Table 6. Thermal Resistance
Package Type θ
JA
θ
JC
Unit
RM-8 194 38 °C/W
R-8 122 41 °C/W
RU-14 112 43 °C/W
R-14 115 36 °C/W
POWER SEQUENCING
Apply the op amp supplies simultaneously; if this is not
possible, apply the positive power supply first, before the
negative power supply.
ESD CAUTION
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.