Datasheet

ADA4417-3
Rev. A | Page 4 of 16
V
S
= 3.3 V (@ T
A
= 25°C, V
IN
= 1.0 V p-p, G = +2, R
T
= 0 Ω
1
, R
L
= 150 Ω, DCO = 1, unless otherwise noted).
Table 2.
Parameter Test Conditions/Comments Min Typ Max Unit
OVERALL PERFORMANCE
DC Offset DCO = 1, input referred 66 100 145 mV
DCO = 0, input referred 42 mV
Input Voltage Range See Note 2
2
Output Voltage Range 0.08 3.05 V
Linear Output Current Per channel 20 mA
DC Voltage Gain 5.75 6.16 dB
Integrated Voltage Noise f = 100 kHz to 30 MHz, input referred 0.4 mV rms
Filter Input Bias Current 3.2 μA
Slew Rate 130 V/μs
Settling Time to 0.5% 70 ns
Output Overdrive Recovery 125 ns
Total Harmonic Distortion f = 1 MHz, V
IN
= 0.7 V p-p 0.08 %
Gain Matching 0.02 0.18 dB
FILTER DYNAMIC PERFORMANCE
−1 dB Bandwidth 27 38 MHz
−3 dB Bandwidth 31 42 MHz
Out-of-Band Rejection f = 75 MHz 40 44 dB
Crosstalk f = 5 MHz, input referred, R
T
= 275 Ω
1
−61 dB
Propagation Delay f = 5 MHz 26.5 ns
Group Delay Variation f = 1 MHz to 36 MHz 4 ns
Differential Gain Modulated 10 step ramp, sync tip at 0 V 0.07 %
Differential Phase Modulated 10 step ramp, sync tip at 0 V 0.14 Degrees
DISABLE PERFORMANCE
DISABLE Assert Voltage
0.8 V
DISABLE Assert Time
110 ns
DISABLE Deassert Voltage
2.0 V
DISABLE Deassert Time
3.0 μs
DISABLE Input Bias Current
19 μA
Input-to-Output Isolation—Disabled
f = 5 MHz, DISABLE
= 0
92 dB
POWER SUPPLY
Operating Range 3.3 to 5.0 V
Quiescent Current DCO = 0 19.0 21.5 mA
DCO = 1 22.5 29.0 mA
Quiescent Current—Disabled
DCO = 0, DISABLE
= 0
10 μA
PSRR DCO = 0 52 71 dB
1
See Figure 25.
2
Limited by output range.