Datasheet

ADA4417-3
Rev. A | Page 3 of 16
SPECIFICATIONS
V
S
= 5 V (@ T
A
= 25°C, V
IN
= 1 V p-p, G = +2, R
T
= 0 Ω
1
, R
L
= 150 Ω, DCO = 1, unless otherwise noted).
Table 1.
Parameter Test Conditions/Comments Min Typ Max Unit
OVERALL PERFORMANCE
DC Offset DCO = 1, input referred 70 100 142 mV
DCO = 0, input referred 40 mV
Input Voltage Range See Note 2
2
Output Voltage Range 0.08 4.73 V
Linear Output Current Per channel 30 mA
DC Voltage Gain 5.88 6.07 dB
Integrated Voltage Noise f = 100 kHz to 30 MHz, input referred 0.4 mV rms
Filter Input Bias Current 3.2 μA
Slew Rate 150 V/μs
Settling Time to 0.5% 65 ns
Output Overdrive Recovery 125 ns
Total Harmonic Distortion f = 1 MHz, V
IN
= 0.7 V p-p 0.01 %
Gain Matching 0.01 0.09 dB
FILTER DYNAMIC PERFORMANCE
−1 dB Bandwidth 27 38 MHz
−3 dB Bandwidth 31 42 MHz
Out-of-Band Rejection f = 75 MHz 38 44 dB
Crosstalk f = 5 MHz, input referred, R
T
= 275 Ω
1
−68 dB
Propagation Delay f = 5 MHz 26 ns
Group Delay Variation f = 1 MHz to 36 MHz 5 ns
Differential Gain Modulated 10 step ramp, sync tip at 0 V 0.06 %
Differential Phase Modulated 10 step ramp, sync tip at 0 V 0.21 Degrees
DISABLE PERFORMANCE
DISABLE Assert Voltage
0.8 V
DISABLE Assert Time
100 ns
DISABLE Deassert Voltage
2.0 V
DISABLE Deassert Time
2.0 μs
DISABLE Input Bias Current
32 μA
Input-to-Output Isolation—Disabled
f = 5 MHz, DISABLE
= 0
92 dB
POWER SUPPLY
Operating Range 3.3 to 5.0 V
Quiescent Current DCO = 0 19.5 22.5 mA
DCO = 1 24.0 29.5 mA
Quiescent Current—Disabled
DCO = 0, DISABLE
= 0
10 μA
PSRR DCO = 0 55 71 dB
1
See Figure 25.
2
Limited by output range.