Datasheet

ADA4091-2/ADA4091-4 Data Sheet
Rev. G | Page 6 of 20
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter Rating
Supply Voltage 36 V
Input Voltage Refer to the Input
Overvoltage Protection
section
Differential Input Voltage
1
±V
SY
Input Current ±5 mA
Output Short-Circuit Duration to GND Indefinite
Storage Temperature Range −65°C to +150°C
Operating Temperature Range −40°C to +125°C
Junction Temperature Range −65°C to +150°C
Lead Temperature (Soldering, 60 sec) 300°C
1
Input current should be limited to ±5 mA.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the device soldered on a 4-layer JEDEC standard
PCB with zero airflow. The exposed pad is soldered to the
application board.
Table 6. Thermal Resistance
Package Type
θ
JA
θ
JC
Unit
8-Lead SOIC (R-8) 155 45 °C/W
14-Lead TSSOP (RU-14)
112
35
°C/W
8-Lead LFCSP (CP-8-9) 75 12 °C/W
16-Lead LFCSP (CP-16-17) 55 14 °C/W
ESD CAUTION