Datasheet

AD9737A/AD9739A Data Sheet
Rev. C | Page 12 of 64
A
B
C
D
E
F
G
H
J
K
L
M
N
P
14131211106321954
IRQ
CS
SCLK
RESET
SDIO
SDO
7
IOUTN
8
IOUTP
I120
VREF
09616-037
AD9739A
Figure 8. AD9739A Analog I/O and SPI Control Pins (Top View)
Table 8. AD9739A Pin Function Descriptions
Pin No. Mnemonic Description
C1, C2, D1, D2, E1, E2, E3, E4 VDDC 1.8 V Clock Supply Input.
A1, A2, A3, A4, A5, B1, B2, B3, B4, B5, C4,
C5, D4, D5
VSSC Clock Supply Ground.
A10, A11, B10, B11, C10, C11, D10, D11 VDDA 3.3 V Analog Supply Input.
A12, A13, B12, B13, C12, C13, D12, D13, VSSA Analog Supply Ground.
A6, A9, B6, B9, C6, C9, D6, D9, E11, E12,
E13, E14, F1, F2, F3, F4, F11, F12
VSSA Shield Analog Supply Ground Shield. Tie to VSSA at the DAC.
A14 NC Do not connect to this pin.
A7, B7, C7, D7 IOUTN DAC Negative Current Output Source.
A8, B8, C8, D8 IOUTP DAC Positive Current Output Source.
B14 I120
Nominal 1.2 V Reference. Tie to analog ground via a 10 kΩ
resistor to generate a 120 μA reference current.
C14 VREF
Voltage Reference Input/Output. Decouple to VSSA with a 1 nF
capacitor.
D14 NC Factory Test Pin. Do not connect to this pin.
C3, D3 DACCLK_N/DACCLK_P Negative/Positive DAC Clock Input (DACCLK).
F13 IRQ
Interrupt Request Open Drain Output. Active high. Pull up to
VDD33 with a 10 kΩ resistor.
F14 RESET Reset Input. Active high. Tie to VSS if unused.
G13
CS
Serial Port Enable Input.
G14 SDIO Serial Port Data Input/Output.
H13 SCLK Serial Port Clock Input.
H14 SDO Serial Port Data Output.
J3, J4, J11, J12 VDD33 3.3 V Digital Supply Input.
G1, G2, G3, G4, G11, G12 VDD 1.8 V Digital Supply Input.
H1, H2, H3, H4, H11, H12, K3, K4, K11, K12 VSS Digital Supply Ground.
J1, J2 NC
Differential resistor of 200 Ω exists between J1 and J2. Do not
connect to this pin.
K1, K2 NC
Differential resistor of 100 Ω exists between K1 and K2. Do not
connect to this pin.
J13, J14 DCO_P/DCO_N Positive/Negative Data Clock Output (DCO).
K13, K14 DCI_P/DCI_N Positive/Negative Data Clock Input (DCI).