Datasheet

AD9653 Data Sheet
Rev. 0 | Page 4 of 40
AVDD = 1.8 V, DRVDD = 1.8 V, 2.6 V p-p full-scale differential input at −1.0 dBFS; V
REF
= 1.3 V; 0°C to 85°C, DCS off, unless otherwise noted.
Table 2.
Parameter
1
Temperature Min Typ Max Unit
RESOLUTION 16 Bits
ACCURACY
No Missing Codes 25°C Guaranteed
Offset Error 25°C −0.3 % FSR
Offset Matching 25°C +0.2 % FSR
Gain Error 25°C −5 % FSR
Gain Matching 25°C 1.1 % FSR
Differential Nonlinearity (DNL) 25°C ±0.8 LSB
Integral Nonlinearity (INL) 25°C ±5.0 LSB
TEMPERATURE DRIFT
Offset Error 25°C 3.5 ppm/°C
INTERNAL VOLTAGE REFERENCE
Output Voltage (1.3 V Programmable Mode) 25°C 1.3 V
Load Regulation at 1.0 mA (V
REF
= 1.3 V) 25°C 6.5 mV
Input Resistance 25°C 7.5 kΩ
INPUT-REFERRED NOISE
V
REF
= 1.3 V 25°C 2.1 LSB rms
ANALOG INPUTS
Differential Input Voltage (V
REF
= 1.3 V) 25°C 2.6 V p-p
Common-Mode Voltage 25°C 0.9 V
Common-Mode Range 25°C 0.6 1.3 V
Differential Input Resistance 25°C 2.6 kΩ
Differential Input Capacitance 25°C 7 pF
POWER SUPPLY
AVDD
25°C
1.8
V
DRVDD
25°C
1.8
V
I
AVDD
2
25°C 314 mA
I
DRVDD
(ANSI-644 Mode)
2
25°C 60 mA
I
DRVDD
(Reduced Range Mode)
2
25°C 45 mA
TOTAL POWER CONSUMPTION
DC Input 25°C 614 mW
Sine Wave Input (Four Channels Including Output Drivers, ANSI-644 Mode) 25°C 673 mW
Sine Wave Input (Four Channels Including Output Drivers, Reduced Range Mode) 25°C 646 mW
Power-Down 25°C 2 mW
Standby
3
25°C 371 mW
1
See the AN-835 Application Note, Understanding High Speed ADC Testing and Evaluation, for definitions and for details on how these tests were completed.
2
Measured with a low input frequency, full-scale sine wave on all four channels.
3
Can be controlled via the SPI.