Datasheet

ManualsBrandsANALOG DEVICES ManualsClock & Timing ICsAD9548BCPZ

AD9548 Data Sheet

Rev. E | Page 74 of 112

Table 54. IRQ Mask for Reference Inputs

Address Bits Bit Name Description

0x020D [7] Ref AA new profile Enables IRQ for indicating that Ref AA has switched to a new profile

[6]

Ref AA validated

Enables IRQ for indicating that Ref AA has been validated

[5] Ref AA fault cleared Enables IRQ for indicating that Ref AA has been cleared of a previous fault

[4] Ref AA fault Enables IRQ for indicating that Ref AA has been faulted

[3] Ref A new profile Enables IRQ for indicating that Ref A has switched to a new profile

[2] Ref A validated Enables IRQ for indicating that Ref A has been validated

[1] Ref A fault cleared Enables IRQ for indicating that Ref A has been cleared of a previous fault

[0] Ref A fault Enables IRQ for indicating that Ref A has been faulted

0x020E [7] Ref BB new profile Enables IRQ for indicating that Ref BB has switched to a new profile

[6] Ref BB validated Enables IRQ for indicating that Ref BB has been validated

[5] Ref BB fault cleared Enables IRQ for indicating that Ref BB has been cleared of a previous fault

[4]

Ref BB fault

Enables IRQ for indicating that Ref BB has been faulted

[3] Ref B new profile Enables IRQ for indicating that Ref B has switched to a new profile

[2] Ref B validated Enables IRQ for indicating that Ref B has been validated

[1] Ref B fault cleared Enables IRQ for indicating that Ref B has been cleared of a previous fault

[0] Ref B fault Enables IRQ for indicating that Ref B has been faulted

0x020F [7] Ref CC new profile Enables IRQ for indicating that Ref CC has switched to a new profile

[6] Ref CC validated Enables IRQ for indicating that Ref CC has been validated

[5] Ref CC fault cleared Enables IRQ for indicating that Ref CC has been cleared of a previous fault

[4] Ref CC fault Enables IRQ for indicating that Ref CC has been faulted

[3]

Ref C new profile

Enables IRQ for indicating that Ref C has switched to a new profile

[2] Ref C validated Enables IRQ for indicating that Ref C has been validated

[1] Ref C fault cleared Enables IRQ for indicating that Ref C has been cleared of a previous fault

[0]

Ref C fault

Enables IRQ for indicating that Ref C has been faulted

0x0210 [7] Ref DD new profile Enables IRQ for indicating that Ref DD has switched to a new profile

[6] Ref DD validated Enables IRQ for indicating that Ref DD has been validated

[5] Ref DD fault cleared Enables IRQ for indicating that Ref DD has been cleared of a previous fault

[4] Ref DD fault Enables IRQ for indicating that Ref DD has been faulted

[3] Ref D new profile Enables IRQ for indicating that Ref D has switched to a new profile

[2] Ref D validated Enables IRQ for indicating that Ref D has been validated

[1] Ref D fault cleared Enables IRQ for indicating that Ref D has been cleared of a previous fault

[0] Ref D fault Enables IRQ for indicating that Ref D has been faulted

Table 55. Watchdog Timer

Address Bits Bit Name Description

0x0211 [7:0] Watchdog timer Watchdog timer, Bits[7:0] (default = 0x00)

0x0212 [7:0] Watchdog timer, Bits[15:8] (default = 0x00)

The watchdog timer is expressed in milliseconds. The default value is 0 (disabled).

Table 56. Auxiliary DAC

Address Bits Bit Name Description

0x0213 [7:0] Full-scale current Full scale current, Bits[7:0] (default = 0xFF)

0x0214

[7] DAC shutdown Shut down the DAC current sources.

0 (default) = normal operation

1 = shut down

[6:2] Unused

[1:0] Full-scale current Full-scale current, Bits[9:8] (default = 0b01)

(default current = 0x1FF, or 20.1 mA)

The default DAC full-scale current value is 0x01FF = 511, which equates to 20.1375 mA.