Datasheet

AD9393
Rev. 0 | Page 30 of 40
0xC8—Bit[6], ISRC1 Valid
This bit is an indication of whether the ISRC1 packet bytes are
valid. 0 = ISRC1 status bits and PBs not valid. 1 = ISRC1 status
bits and PBs valid.
0xC8—[2:0], ISRC Status
These bits define where in the ISRC track the samples are. At
least two transmissions of 001 occur at the beginning of the
track, while continuous transmission of 010 occurs in the
middle of the track, followed by at least two transmissions of
100 near the end of the track.
0xCF—Bits[6:0], New Data Flags
See the 0x87—Bits[6:0], New Data Flags (NDF) section for a
description.
0xD7—Bits[6:0], New Data Flags
See the 0x87—Bits[6:0], New Data Flags (NDF) section for a
description.
0xDC—Bits[7:0], ISRC2 Packet Byte 0 (ISRC2_PB0)
This is transmitted only when the ISRC continued bit
(Register 0xC8 Bit 7) is set to 1.
0xDF—Bits[6:0], New Data Flags
See the 0x87—Bits[6:0], New Data Flags (NDF) section for a
description.
0xE7—Bits[6:0], New Data Flags
See the 0x87—Bits[6:0], New Data Flags (NDF) section for a
description.