Datasheet

AD9277
Rev. 0 | Page 43 of 48
Addr.
(Hex) Register Name
Bit 7
(MSB) Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1
Bit 0
(LSB)
Default
Value Comments
0x0F flex_channel_input Filter cutoff frequency control
0000 = 1.3 × 1/3 × f
SAMPLE
0001 = 1.2 × 1/3 × f
SAMPLE
0010 = 1.1 × 1/3 × f
SAMPLE
0011 = 1.0 × 1/3 × f
SAMPLE
(default)
0100 = 0.9 × 1/3 × f
SAMPLE
0101 = 0.8 × 1/3 × f
SAMPLE
0110 = 0.7 × 1/3 × f
SAMPLE
1000 = 1.3 × 1/4.5 × f
SAMPLE
1001 = 1.2 × 1/4.5 × f
SAMPLE
1010 = 1.1 × 1/4.5 × f
SAMPLE
1011 = 1.0 × 1/4.5 × f
SAMPLE
1100 = 0.9 × 1/4.5 × f
SAMPLE
1101 = 0.8 × 1/4.5 × f
SAMPLE
1110 = 0.7 × 1/4.5 × f
SAMPLE
X X X X 0x30 Antialiasing filter
cutoff (global).
0x10 flex_offset X X 6-bit LNA offset adjustment
10 0000 for LNA bias high, mid-high, mid-low (default)
10 0001 for LNA bias low
0x20 LNA force offset
correction
(local).
0x11 flex_gain X X X X PGA gain
00 = 21 dB
01 = 24 dB (default)
10 = 27 dB
11 = 30 dB
LNA gain
00 = 15.6 dB
01 = 17.9 dB
10 = 21.3 dB
(default)
0x06 LNA and PGA gain
adjustment
(global).
0x12 bias_current X X X X 1 X LNA bias
00 = high (default)
01 = mid-high
10 = mid-low
11 = low
0x08 LNA bias current
adjustment
(global).
0x14 output_mode X 0 = LVDS
ANSI-644
(default)
1 = LVDS
low power,
(IEEE
1596.3
similar)
X X X Output
invert
enable
1 = on
0 = off
(default)
Data format select
00 = offset binary
(default)
01 = twos
complement
0x00 Configures the
outputs and the
format of the data
(Bits[7:3] and
Bits[1:0] are global;
Bit 2 is local).
0x15 output_adjust X X Output driver
termination
00 = none (default)
01 = 200 Ω
10 = 100 Ω
11 = 100 Ω
X X X DCO±
and
FCO±
2× drive
strength
1 = on
0 = off
(default)
0x00 Determines LVDS
or other output
properties.
Primarily functions
to set the LVDS
span and
common-mode
levels in place of
an external resistor
(Bits[7:1] are global;
Bit 0 is local).
0x16 output_phase X X X X 0011 = output clock phase adjust
(0000 through 1010)
(Default: 180° relative to data edge)
0000 = 0° relative to data edge
0001 = 60° relative to data edge
0010 = 120° relative to data edge
0011 = 180° relative to data edge
0100 = 240° relative to data edge
0101 = 300° relative to data edge
0110 = 360° relative to data edge
0111 = 420° relative to data edge
1000 = 480° relative to data edge
1001 = 540° relative to data edge
1010 = 600° relative to data edge
1011 to 1111 = 660° relative to data edge
0x03 On devices that
utilize global
clock divide,
determines which
phase of the
divider output is
used to supply
the output clock.
Internal latching
is unaffected.
0x18 flex_vref X 0 =
internal
reference
1 =
external
reference
X X X X X X 0x00 Select internal
reference
(recommended
default) or
external reference
(global).