Datasheet

AD9260
Rev. C | Page 11 of 44
ABSOLUTE MAXIMUM RATINGS
Table 10.
Parameter Rating
AVDD to AVSS –0.3 V to +6.5 V
DVDD to DVSS –0.3 V to +6.5 V
AVSS to DVSS –0.3 V to +0.3 V
AVDD to DVDD –6.5 V to +6.5 V
DRVDD to DRVSS –0.3 V to +6.5 V
DRVSS to AVSS –0.3 V to +0.3 V
REFCOM to AVSS –0.3 V to +0.3 V
CLK, MODE, READ,
CS
, and
RESET
to
DVSS
–0.3 V to DVDD + 0.3 V
Digital Outputs to DRVSS –0.3 V to DRVDD + 0.3 V
VINA, VINB, CML, and BIAS to AVSS –0.3 V to AVDD + 0.3 V
VREF to AVSS –0.3 V to AVDD + 0.3 V
SENSE to AVSS –0.3 V to AVDD + 0.3 V
CAPB and CAPT to AVSS –0.3 V to AVDD + 0.3 V
Junction Temperature 150°C
Storage Temperature –65°C to +150°C
Lead Temperature (10 s) 300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to
absolute maximum ratings for extended periods may affect
device reliability.
THERMAL CHARACTERISTICS
Thermal Resistance
44-Lead MQFP
θ
JA
= 53.2°C/W
θ
JC
= 19°C/W
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.