Datasheet

AD9230
Rev. 0 | Page 12 of 32
Pin No. Mnemonic Description
9 OR− D6 Complement Output Bit. (This pin is disabled if Pin 21 is reconfigured through the SPI to be OR−.)
10 OR+ D6 True Output Bit. (This pin is disabled if Pin 22 is reconfigured through the SPI to be OR+.)
11 to 20 DNC Do Not Connect.
21 DNC/(OR−)
Do Not Connect. (This pin can be reconfigured as the Overrange Complement Output Bit through
the serial port register.)
22 DNC/(OR+)
Do Not Connect. (This pin can be reconfigured as the Overrange True Output Bit through the serial
port register.)
1
AGND and DRGND should be tied to a common quiet ground plane.