Datasheet

AD9229
Rev. B | Page 8 of 40
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter
With
Respect To Rating
ELECTRICAL
AVDD AGND –0.3 V to +3.9 V
DRVDD DRGND –0.3 V to +3.9 V
AGND DRGND –0.3 V to +0.3 V
AVDD DRVDD –3.9 V to +3.9 V
Digital Outputs (D+, D–,
DCO+, DCO–, FCO+, FCO–)
DRGND –0.3 V to DRVDD
LVDSBIAS DRGND –0.3 V to DRVDD
CLK AGND –0.3 V to AVDD
VIN+, VIN– AGND –0.3 V to AVDD
PDWN, DTP AGND –0.3 V to AVDD
REFT, REFB AGND –0.3 V to AVDD
VREF, SENSE AGND –0.3 V to AVDD
ENVIRONMENTAL
Operating Temperature
Range (Ambient)
–40°C to +85°C
Maximum Junction
Temperature
150°C
Lead Temperature
(Soldering, 10 sec)
300°C
Storage Temperature Range
(Ambient)
–65°C to +150°C
Thermal Impedance
1
25°C/W
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
EXPLANATION OF TEST LEVELS
I. 100% production tested.
II. 100% production tested at 25°C and guaranteed by design
and characterization at specified temperatures.
III. Sample tested only.
IV. Parameter is guaranteed by design and characterization
testing.
V. Parameter is a typical value only.
VI. 100% production tested at 25°C and guaranteed by design
and characterization for industrial temperature range.
1
θ
JA
for a 4-layer PCB with a solid ground plane in still air.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.