Datasheet

Data Sheet AD8597/AD8599
Rev. E | Page 5 of 20
ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter Rating
Supply Voltage ±18 V
Input Voltage −V ≤ V
IN
≤ +V
Differential Input Voltage
1
±1 V
Output Short-Circuit to GND Indefinite
Storage Temperature Range −65°C to +150°C
Operating Temperature Range −40°C to +125°C
Lead Temperature Range (Soldering 60 sec) 300°C
Junction Temperature
150°C
1
If the differential input voltage exceeds 1 V, limit the current to 5 mA.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified with the device soldered on a circuit board with
its exposed paddle soldered to a pad (if applicable) on a 4-layer
JEDEC standard PCB with zero air flow.
Table 5.
Package Type θ
JA
θ
JC
Unit
8-Lead LFCSP_VD (CP-8-2) 78 20 °C/W
8-Lead SOIC (R-8) (AD8597)
140
39
°C/W
8-Lead SOIC (R-8) (AD8599) 120 36 °C/W
POWER SEQUENCING
Apply the op amp supplies simultaneously. The op amp supplies
must be stable before any input signals are applied. In any case,
the input current must be limited to 5 mA.
ESD CAUTION