Datasheet

AD8469 Data Sheet
Rev. 0 | Page 4 of 12
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Rating
Supply Voltages, V
CC
and V
EE
V
CC
to Ground
−0.5 V to +6.0 V
Differential Supply Voltage −6.0 V to +6.0 V
Analog Inputs, V
P
and V
N
Input Voltage −0.5 V to V
CC
+ 0.5 V
Differential Input Voltage ±(V
CC
+ 0.5 V)
Maximum Input/Output Current ±50 mA
Shutdown Pin, S
DN
Applied Voltage (S
DN
to Ground) −0.5 V to V
CC
+ 0.5 V
Maximum Input/Output Current ±50 mA
Hysteresis Control Pin, HYS
Applied Voltage (HYS to Ground) −0.5 V to V
CC
+ 0.5 V
Maximum Input/Output Current ±50 mA
Output Current, Q and Q
±50 mA
Operating Temperature
Ambient Temperature Range −40°C to +125°C
Junction Temperature 150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 3.
Package Type θ
JA
1
Unit
8-Lead MSOP (RM-8) 130 °C/W
1
Measurement in still air.
ESD CAUTION