Datasheet

Data Sheet AD841
Rev. C | Page 5 of 16
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Rating
Supply Voltage (V
S
) ±18 V
Internal Power Dissipation
1
PDIP (N-14) 1.5 W
CERDIP (Q-14) 1.3 W
Input Voltage ±V
S
Differential Input Voltage ±6 V
Storage Temperature Range
Q-14 −65°C to +150°C
N-14 −65°C to +125°C
Operating Temperature Range
AD841J/AD841K 0°C to 70°C
AD841S −55°C to +125°C
Junction Temperature +175°C
Lead Temperature Range (Soldering 60 sec) +300°C
1
Maximum internal power dissipation is specified so that T
J
does not exceed
175°C at an ambient temperature of 25°C.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL CHARACTERISTICS
Table 3.
Package Type θ
JC
θ
JA
θ
SA
Unit
14-Lead CERDIP 35 110 38 °C/W
14-Lead PDIP 30 100 °C/W
20-Lead LCC 35 150 °C/W
ESD CAUTION
Figure 3. Metalization Photograph
Contact factory for latest dimensions
Dimensions shown in inches and (millimeters)
BALANCE
OUTPUT
+V
S
–V
S
–V
IN
+V
IN
BALANCE
0
.067
(1.7)
0.099
(2.5)
SUBSTRATE CONNECTED TO +V
S
11340-003