Datasheet

AD834 Data Sheet
Rev. F | Page 4 of 20
Parameters Conditions Min Typ Max Unit
POWER SUPPLIES
Operating Range ±4 ±9 V
Quiescent Current
6
T
MIN
to T
MAX
+V
S
11
14
mA
–V
S
28
35
mA
1
Error is defined as the maximum deviation from the ideal output, and expressed as a percentage of the full-scale output. See Figure 16.
2
Both supplies taken simultaneously; sinusoidal input at f ≤10 kHz.
3
Linearity is defined as residual error after compensating for input offset voltage, output offset current, and scaling current errors.
4
Bandwidth is guaranteed when configured in squarer mode. See Figure 12.
5
Sine input; relative to full-scale output; zero input port nulled; represents feedthrough of the fundamental.
6
Negative supply current is equal to the sum of positive supply current, the signal currents into each output, W1 and W2, and the input bias currents.