Datasheet

AD8336
Rev. C | Page 6 of 28
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
1
4
3
2
14 131516
9
12
11
10
8765
VPOS NC NC NC
VOUT
PWRA
VCOM
INPP
INPN
NC
PRAO
NC
VGAI
VNEG
GNEG
GPOS
PI N 1
INDICATOR
AD8336
TOP VIEW
(Not to Scale)
06228-002
NOTES
1. NC = NO CONNECT.
2. THE EXPOSED PAD IS NOT CONNECTED INTERNALLY.
FOR INCREASED RELIABILITY OF THE SOLDE
R
JOINTS AND MAXIMUM THERMAL CAPABILITY, IT IS
RECOMMENDED THAT THE PADDLE BE SOLDERED
TO THE GROUND PLANE.
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No. Mnemonic Description
1 VOUT Output Voltage.
2 PWRA Power Control. Normal power when grounded; power reduced by half if PWRA is pulled high.
3 VCOM Common-Mode Voltage. Normally GND when using a dual supply.
4 INPP Positive Input to Preamp.
5 INPN Negative Input to Preamp.
6 NC No Connect.
7 NC No Connect.
8 PRAO Preamp Output.
9 VGAI VGA Input.
10 VNEG Negative Supply.
11 GPOS Positive Gain Control Input.
12 GNEG Negative Gain Control Input.
13 VPOS Positive Supply.
14 NC No Connect.
15 NC No Connect.
16 NC No Connect.