Datasheet

AD8330 Data Sheet
Rev. F | Page 4 of 32
Parameter Conditions Min Typ Max Unit
CHIP ENABLE Pin ENBL
Logic Voltage for Full Shutdown 0.5 V
Logic Voltage for Hibernate Mode Output pins remain at CNTR 1.3 1.5 1.7 V
Logic Voltage for Full Operation 2.3 V
Current in Full Shutdown
20
100
μA
Current in Hibernate Mode 1.5 mA
Minimum Time Delay
3
1.7 μs
POWER SUPPLY VPSI, VPOS, VPSO, COMM, and CMOP pins
Supply Voltage 2.7 6 V
Quiescent Current V
DBS
= 0.75 V 20 27 mA
1
The use of an input common-mode voltage significantly different from the internally set value is not recommended due to its effect on noise performance.
See Figure 56.
2
See the Typical Performance Characteristics section for more detailed information on distortion in a variety of operating conditions.
3
For minimum sized coupling capacitors.