Datasheet

EVAL-AD8330EB
Rev. B | Page 4 of 4
Table 2. AD8330 Parts List
Pin No. Quantity Description Reference Designator
1 1 Resistor SM, 49.9 Ω, 1%, 1/16 W, 0603 R5
2 1 Resistor SM, 24.9 Ω, 1%, 1/8 W, 1206 R13
3 1 Resistor SM, 0 Ω, 5%, 1/8 W, 1206 R1
4 1 Resistor SM, 1 kΩ, 1%, 1/8 W, 1206 R12
5 11 Capacitor SM, 0.1 μF, 50 V, 1206 C2, C4, C6, C7, C10, C11, C12, C15, C18, C19, C20
6 2 Capacitor SM, 0.1 μF, 16 V, 0603 C3, C5
7 2 Capacitor SM tantalum, 10 μF, 10 V, A C1, C17
8 2 Capacitor SM, 10 nF, 50 V, 1206 C14, C16
9 2 Capacitor SM, 12 pF, 5%, NPO, 0603 C8, C9
10 1 Capacitor SM, 1 nF, 50 V, 5%, 1206 C13
11 7 Header, 2 pin CMGN1, IN_HI/LO, OUT_HI/ OUT_LO, W1, W2, W3, W4
12 3 Shunt CMGN1, W2, W3
13 1 IC, VGA, AD8330ARQ DUT
14 1 IC, differential amplifier, AD8131AR A1
15 3 Connector, SMA fem end launch In, out high, out low
16 10 Test point
+5V, –5V, AGND1, AGND2, AGND3, 1GND4, ENBL,
VCMD, VDBS, VMAG
17 1 Board, PC, A00471C
18 4 Standoff aluminum round 4 to 40 × 1/2"
19 4 Pan head screw 4 to 40 × 1/4"
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
ORDERING GUIDE
Model Description
AD8330-EVAL Evaluation Board
©2006 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
C03721-0-3/06(B)
T TTT