Datasheet

AD823A Data Sheet
Rev. B | Page 6 of 20
ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter Rating
Supply Voltage 36 V
Power Dissipation See Figure 4
Input Voltage (Common Mode) ±V
S
± 0.7 V
Differential Input Voltage ±V
S
Output Short-Circuit Duration See Figure 4
Storage Temperature Range −65°C to +125°C
Operating Temperature Range −40°C to +85°C
Lead Temperature (Soldering, 10 sec) 300°C
ESD Ratings (Human Body Model) 4500 V
ESD Ratings (Charged Device Model) 1250 V
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Use the part with caution at the 30 V supply as excessive output
current may overheat and damage the part.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
The specification is for the device in free air.
Table 5. Thermal Resistance
Package Type θ
JA
Unit
8-Lead SOIC_N 120 °C/W
8-Lead MSOP 133 °C/W
MAXIMUM POWER DISSIPATION (W)
AMBIENT TEMPERATURE (°C)
2.0
1.5
0
–45 –35 –25 –15 –5 5 15 25 35 45 55 65 75 85
1.0
0.5
T
J
= 150°C
09439-004
8-LEAD MSOP
8-LEAD SOIC
Figure 4. Maximum Power Dissipation vs. Temperature
ESD CAUTION