Datasheet

AD8235
Rev. 0 | Page 7 of 20
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter Rating
Supply Voltage 6 V
Output Short-Circuit Current 55 mA
Input Voltage (Common Mode) ±V
S
Differential Input Voltage ±V
S
Storage Temperature Range −65°C to +125°C
Operating Temperature Range −40°C to +125°C
Junction Temperature 125°C
ESD
Human Body Model 1.5 kV
Charge Device Model 0.5 kV
Machine Model 200 V
THERMAL RESISTANCE
e conditions, that is, a device
lder
e
ermal Resistance
Power (W) θ
JA
(°C/W)
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
θ
JA
is specified for the worst-cas
so ed in a circuit board for surface-mount packages. This
was measured using a standard 4-layer board, unless otherwis
specified.
Table 4. Th
Package Type PCB
11-Ball WLCSP CB-11-1 1S0P
1
0.25 139.1
1.25 130
2S2P
2
0.25 69.5
1.25 68.3
1
Simulated thermal numbers per JESD51-9:
1-layer PCB (1S0P), low effective thermal conductivity test board.
nductivity test board.
ION
2
4-layer PCB (2S2P), high effective thermal co
ESD CAUT