Datasheet

AD8220
Rev. B | Page 8 of 28
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter Rating
Supply Voltage ±18 V
Power Dissipation See Figure 3
Output Short-Circuit Current Indefinite
1
Input Voltage (Common Mode) ±Vs
Differential Input Voltage ±Vs
Storage Temperature Range −65°C to +125°C
Operating Temperature Range
2
−40°C to +125°C
Lead Temperature (Soldering 10 sec) 300°C
Junction Temperature 140°C
θ
JA
(4-Layer JEDEC Standard Board) 135°C/W
Package Glass Transition Temperature 140°C
ESD (Human Body Model) 4 kV
ESD (Charge Device Model) 1 kV
ESD (Machine Model) 0.4 kV
1
Assumes the load is referenced to midsupply.
2
Temperature for specified performance is −40°C to +85°C. For performance
to 125°C, see the Typical Performance Characteristics section.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Figure 3 shows the maximum safe power dissipation in the
package vs. the ambient temperature for the MSOP on a 4-layer
JEDEC standard board. θ
JA
values are approximations.
2.00
0
–40 120
03579-045
AMBIENT TEMPERATURE (°C)
MAXIMUM POWER DISSIPATION (W)
1.75
1.50
1.25
1.00
0.75
0.50
0.25
–20 0 20 40 60 80 100
Figure 3. Maximum Power Dissipation vs. Ambient Temperature
ESD CAUTION