Datasheet

AD8203 Data Sheet
Rev. D | Page 4 of 20
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Rating
Supply Voltage 12.5 V
Transient Input Voltage (400 ms)
44 V
Continuous Input Voltage (Common Mode) 35 V
Reversed Supply Voltage Protection 0.3 V
Operating Temperature Range
SOIC −40°C to +125°C
MSOP
−40°C to +125°C
Storage Temperature
−65°C to +150°C
Output Short-Circuit Duration Indefinite
Lead Temperature Range (Soldering 10 sec) 300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate
on the human body and test equipment and can discharge without detection. Although this product
features prop
rietary ESD protection circuitry, permanent damage may occur on devices subjected to
high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid
performance degradation or loss of functionality.