Datasheet
Data Sheet  AD8016
Rev. C | Page 5 of 20 
ABSOLUTE MAXIMUM RATINGS 
Table 4. 
Parameter Rating 
Supply Voltage  26.4 V 
Internal Power Dissipation   
SOIC_W_BAT Package
1
 1.4 W 
TSSOP_EP Package
2
 1.4 W 
Input Voltage (Common-Mode)  ±V
S
Differential Input Voltage  ±V
S
Output Short-Circuit Duration  Observe power derating 
curves 
Storage Temperature Range  −65°C to +125°C 
Operating Temperature Range  −40°C to +85°C 
Lead Temperature Range (Soldering 10 sec)  300°C 
1
 Specification is for device on a 4-layer board with 10 inches
2
 of 1 oz copper 
at 85°C 24-lead SOIC_W_BAT package: θ
JA
 = 28°C/W. 
2 Specification is for device on a 4-layer board with 9 inches
2
 of 1 oz copper at 
85°C 28-lead (TSSOP_EP) package: θ
JA
 = 29°C/W. 
Stresses above those listed under Absolute Maximum Ratings 
may cause permanent damage to the device. This is a stress 
rating only; functional operation of the device at these or any 
other conditions above those indicated in the operational 
section of this specification is not implied. Exposure to absolute 
maximum rating conditions for extended periods may affect 
device reliability. 
MAXIMUM POWER DISSIPATION 
The maximum power that can be safely dissipated by the 
AD8016 is limited by the associated rise in junction temper-
ature. The maximum safe junction temperature for a plastic 
encapsulated device is determined by the glass transition 
temperature of the plastic, approximately 150°C. Temporarily 
exceeding this limit may cause a shift in parametric perfor-
mance due to a change in the stresses exerted on the die by 
the package. 
The output stage of the AD8016 is designed for maximum load 
current capability. As a result, shorting the output to common 
can cause the AD8016 to source or sink 2000 mA. To ensure 
proper operation, it is necessary to observe the maximum 
power derating curves. Direct connection of the output to 
either power supply rail can destroy the device. 
Figure 3. Maximum Power Dissipation vs. Temperature for AD8016 for 
T
J
 = 125 °C 
ESD CAUTION 
AMBIENT TEMPERATURE (°C)
7
MAXIMUM POWER DISSIP
A
TION (W)
6
5
4
3
2
1
0
010
SOIC_W_BAT
8
TSSOP-EP
20 30 40 50 60 70 80 90
01019-005










