Datasheet

AD7880
REV. 0
–15–
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
24-Lead Plastic DIP (N-24)
24
112
13
1.228 (31.19)
1.226 (31.14)
0.260 ± 0.001
(6.61 ± 0.03)
PIN 1
SEATING
PLANE
0.02 (0.5)
0.016 (0.41)
0.130 (3.30)
0.128 (3.25)
0.07 (1.78)
0.05 (1.27)
0.32 (8.128)
0.30 (7.62)
0.011 (0.28)
0.009 (0.23)
15°
0
0.11 (2.79)
0.09 (2.28)
NOTES:
1. LEAD NO. 1 IDENTIFIED BY DOT OR NOTCH.
2. PLASTIC LEADS WILL BE EITHER SOLDER DIPPED OR TIN LEAD PLATED
IN ACCORDANCE WITH MIL-M-38510 REQUIREMENTS.
24-Lead Cerdip (Q-24)
24
1
12
13
0.295
(7.493)
MAX
SEATING
PLANE
0.021 (0.533)
0.015 (0.381)
TYP
0.225
(5.715)
MAX
1.290 (32.77) MAX
0.125
(3.175)
MIN
0.110 (2.794)
0.009 (2.286)
TYP
0.070 (1.778)
0.020 (0.508)
0.065 (1.651)
0.055 (1.397)
15°
0°
0.320 (8.128)
0.291 (7.4)
0.012 (0.305)
0.008 (0.203)
0.180
(4.572)
MAX
1. LEAD NO. 1 IDENTIFIED BY DOT OR NOTCH.
2. CERDIP LEADS WILL BE EITHER TIN PLATED OR SOLDER DIPPED
IN ACCORDANCE WITH MIL-M-38510 REQUIREMENTS.
24-Lead SOIC (R-24)
24 13
121
0.614 (15.6)
0.598 (15.2)
PIN 1
0.012 (0.3)
0.004 (0.1)
0.019 (0.49)
0.014 (0.35)
0.104 (2.65)
0.093 (2.35)
0.05
(1.27)
BSC
0.013 (0.32)
0.009 (0.23)
0.05 (1.27)
0.016 (0.40)
8°
0°
0.03 (0.75)
0.01 (0.25)
0.419 (10.65)
0.394 (10.00)
0.299 (7.6)
0.291 (7.4)