Datasheet

AD7666
Rev. 0 | Page 4 of 28
Parameter Conditions Min Typ Max Unit
DIGITAL INPUTS
Logic Levels
V
IL
–0.3 +0.8 V
V
IH
2.0 DVDD + 0.3 V
I
IL
–1 +1 µA
I
IH
–1 +1 µA
DIGITAL OUTPUTS
Data Format
5
Pipeline Delay
6
V
OL
I
SINK
= 1.6 mA 0.4 V
V
OH
I
SOURCE
= –500 µA OVDD – 0.6 V
POWER SUPPLIES
Specified Performance
AVDD 4.75 5 5.25 V
DVDD 4.75 5 5.25 V
OVDD 2.7 5.25
7
V
Operating Current 500 kSPS Throughput
AVDD
8
With Reference and Buffer 12.2 mA
AVDD
9
Reference and Buffer Alone 3 mA
DVDD
10
4.1 mA
OVDD
10
102 µA
Power Dissipation without REF
8, 10
500 kSPS Throughput 66 75 mW
1 kSPS Throughput 132 µW
Power Dissipation with REF
8, 10
500 kSPS Throughput 81 90 mW
TEMPERATURE RANGE
11
Specified Performance T
MIN
to T
MAX
–40 +85 °C
1
See An section. alog Input
2
LSB means least significant bit. With the 0 V to 2.5 V input range, 1 LSB is 38.15 µV.
3
See the De section. These specifications do not include the error contribution from the external reference. finitions of Specifications
4
All specifications in dB are referred to a full-scale input FS. Tested with an input signal at 0.5 dB below full-scale, unless otherwise specified.
5
Parallel or Serial 16-Bit.
6
Conversion results are available immediately after completed conversion.
7
The max should be the minimum of 5.25 V and DVDD + 0.3 V.
8
With REF, PDREF and PDBUF are LOW; without REF, PDREF and PDBUF are HIGH.
9
With PDREF, PDBUF LOW and PD HIGH.
10
Tested in parallel reading mode.
11
Consult factory for extended temperature range.