Datasheet

AD7466/AD7467/AD7468
Rev. C | Page 11 of 28
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted. Transient currents of up to
100 mA do not cause SCR latch-up.
Table 5.
Parameter Rating
V
DD
to GND −0.3 V to +7 V
Analog Input Voltage to GND −0.3 V to V
DD
+ 0.3 V
Digital Input Voltage to GND −0.3 V to +7 V
Digital Output Voltage to GND −0.3 V to V
DD
+ 0.3 V
Input Current to any Pin Except Supplies ±10 mA
Operating Temperature Range
Commercial (B Version) −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
SOT-23 Package
θ
JA
Thermal Impedance 229.6°C/W
θ
JC
Thermal Impedance 91.99°C/W
MSOP Package
θ
JA
Thermal Impedance 205.9°C/W
θ
JC
Thermal Impedance 43.74°C/W
Lead Temperature, Soldering
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
ESD 3.5 kV
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION