Datasheet

–5–
REV. B
AD73311
AD73311A
Parameter Min Typ Max Unit Test Conditions/Comments
DAC SPECIFICATIONS (Continued)
Power Supply Rejection –55 dB Input Signal Level at AVDD and DVDD
Pins: 1.0 kHz, 100 mV p-p Sine Wave
Group Delay
4, 5
25 µs 64 kHz Input Sample Rate, Interpolator
Bypassed (CRE:5 = 1)
Output DC Offset
2, 7
+30 mV PGA = 6 dB
Minimum Load Resistance, R
L
2, 8
Single-Ended 150 Ω
Differential 150 Ω
Maximum Load Capacitance, C
L
2, 8
Single-Ended 500 pF
Differential 100 pF
FREQUENCY RESPONSE
(ADC AND DAC)
9
Typical Output
0 Hz 0 dB
2000 Hz –0.1 dB
4000 Hz –0.25 dB
8000 Hz –0.6 dB
12000 Hz –1.4 dB
16000 Hz –2.8 dB
20000 Hz –4.5 dB Channel Frequency Response Is
24000 Hz –7.0 dB Programmable by Means of External
28000 Hz –9.5 dB Digital Filtering
> 32000 Hz < –12.5 dB
LOGIC INPUTS
V
INH
, Input High Voltage V
DD
– 0.8 V
DD
V
V
INL
, Input Low Voltage 0 0.8 V
I
IH
, Input Current –0.5 µA
C
IN
, Input Capacitance 10 pF
LOGIC OUTPUT
V
OH
, Output High Voltage V
DD
– 0.4 V
DD
V|I
OUT
| < 100 µA
V
OL
, Output Low Voltage 0 0.4 V |I
OUT
| < 100 µA
Three-State Leakage Current –0.3 µA
POWER SUPPLIES
AVDD1, AVDD2 4.5 5.5 V
DVDD 4.5 5.5 V
I
DD
10
See Table II
N OTES
1
Operating temperature range is as follows: –40°C to +85°C. Therefore, T
MIN
= –40°C and T
MAX
= +85°C.
2
Test conditions: Input PGA set for 0 dB gain, Output PGA set for 6 dB gain, no load on analog outputs (unless otherwise stated).
3
At input to sigma-delta modulator of ADC.
4
Guaranteed by design.
5
Overall group delay will be affected by the sample rate and the external digital filtering.
6
The ADC’s input impedance is inversely proportional to DMCLK and is approximated by: (4 × 10
11
)/DMCLK.
7
Between VOUTP and VOUTN.
8
At VOUT output.
9
Frequency responses of ADC and DAC measured with input at audio reference level (the input level that produces an output level of –10 dBm0), with 38 dB preamplifier
bypassed and input gain of 0 dB.
10
Test conditions: no load on digital inputs, analog inputs ac coupled to ground, no load on analog outputs.
Specifications subject to change without notice.